Deutsch | Español | Français | 简体中文 | 日本 | にほん

IR Sensors in extrusion coating

EC Extrusion Coating Thermal Imaging System

Improve product quality by finding thermal features and defects in real-time with continuous monitoring.

EC Process Imaging System

Edge-to-Edge Thermal Imaging to See it All

  • Real-time thermal imaging for continuous or discrete processes
  • Built-in line laser for rapid alignment, resulting in lower installation costs
  • Ensure products are manufactured to specifications to improve quality

Designed for the harshest environments, the EC Series provides accurate, edge-to-edge and real-time thermal imaging and temperature measurements for continuous processes. See it all with up to 300Hz scan speed and 1024 data points per scan, allowing you to find faulty temperatures, such as hot spots, before an error occurs.

  • At a Glance
  • Technical Specs
  • Applications
  • Accessories
  • Resources

The Extrusion Coating EC Thermal Imaging System from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and product.

Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized extrusion coating, co-extrusion and laminating processes.The series also features dedicated hardware and software options, which have been created specifically for specialized extrusion coating, co-extrusion and laminating processes.

MP Linescanner

With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field-of-view and up to 200:1 optics, each spot on the target surface is capable of being sampled up to three times, ensuring an accurate temperature reading.

In extrusion coating applications, for example, measuring the surface temperature of the melt curtain can provide crucial information about the available temperature distribution at the die exit. The EC Thermal Imaging System is a non-contact temperature measurement solution that can cover the entire width of the polyethylene film and scan the melt curtain directly.

Each linescanner also includes a built-in line laser for rapid alignment, resulting in lower installation costs. Built-in water cooling and air purge features, as well as optional waterproof housing, help maintain the scanner. The MP Linescanner Series also allows users to utilize existing networks with pre-wired cables, which connect to a standard PC for fast installations. The system’s versatile DataTemp® DP Software also lets you create custom operating parameters as well as easily display thermal images and temperature profiles.

Key Features:

  • Real-time thermal imaging, scan speed up to 300Hz
  • Up to 1024 measurement points per line
  • Wide choice of spectral and temperature ranges
  • Optical resolution up to 200:1
  • Real-time color thermal images
  • Accurate data analysis
  • High-quality brushless motor (MTBF 40,000 h)
  • Built-in Ethernet TCP/IP communications
  • PC independent alarm output
  • PC independent 4-20 mA interfaces (3 outputs)
  • I/O module support for up to 10 sectors/zones (PC independent)
  • Internal Line Laser for accurate alignment
  • Rugged, waterproof IP65 housing
  • Air purge keeps window free of dirt and condensation
  • Built-in water cooling for ambient up to 180 °C (356 °F)
  • Field-replaceable window

 

Extrusion Coating System Software

Unique to the EC System software, the “automatic sector” feature continuously monitors the entirety of the melt curtain and provides automation edge detection. This feature also adapts to measuring plastic films of varying widths automatically. Any temperature gaps or unacceptable “waving” or “edge running” can also be detected automatically from one scanned line to the next.

Additionally, by utilizing OLE for Process Control (OPC), the EC Thermal Imaging System can communicate with a variety of common process control systems. As a result, the system is more than a measurement tool and can be used as an integral part of your total process control system.

Key Features:

  • Supports multiple product specific configurations (recipes)
  • Text file alarm logging
  • Fail-safe alarm logging
  • Reference image for comparative analysis
  • Saved thermal images can be played back like a time-lapse movie
  • Multiple system interfaces digital and analog I/O, OPC, direct forwarding of data via ASCII
  • Supports multiple MP Linescanners
  • Password protected access levels
  • Multiple language support
  • Real-time ambient temperature compensation or emissivity adjustment

EC Extrusion Coating System Specifications

Feature Description
Temperature Range 100 to 350°C (212 to 662°F)
System Accuracy ±3°C (6°F)
Repeatability ±1°C (2°F)
Optical Resolution 225:1 (50% energy)
Ambient Temperature 0 to 50°C (32 to 122°F), with internal water cooling 180°C (356°F)
Field of View 90°
Points per Line 256 pixels @ 150 Hz 512 pixels @ 80 Hz 1024 pixels @ 40 Hz
Scan Rate up to 300 Hz

For more information on technical specifications, please see MP Linescanner Technical Specs tab.

 

Standards and Compliance

 

EC Directive 2014/30/EU EMC
EC Directive 2011/65/EU RoHS Compliance amended by Directive (EU) 2015/863
EC Directive 1907/2006 REACH amended by Directive (EU) 2020/2096
EN 61326-1: 2013 Electrical measurement, control and laboratory devices - Electromagnetic susceptibility (EMC)
EN 50581: 2012 Technical documentation for the evaluation of electrical products with respect to restriction of hazardous substances (RoHS)
KCC Electromagnetic Compatibility applies to use in Korea. This product meets requirements for industrial (Class A) electromagnetic wave equipment.

The EC Process Imaging System can be used across numerous industries and is ideal for process monitoring and control, product monitoring, quality pass/fail checks and more in moving applications and discrete manufacturing processes. Click here if you would like to speak with an expert to discuss your application.

Several examples of where this system can be used include, but are not limited to, the following list below.

Plastic Processing

Metals Processing

Adjustable Mounting Base

The Adjustable Mounting Base allows you to make small adjustments to where your linescanner is pointed, allowing you to gather more data from different parts of your process.

Power Supply Options

We offer several power supply options including 240 VAC, 24 VDC and 1.3 A.

Thermostat for Linescanner 

The Thermostat for Linescanner accessory allows users to keep the linescanner housing temperature over the dew point, extending product life by avoiding damage due to condensed water in the interior of the unit housing.

Manufacturer’s Calibration Certificate

Based on NIST/DAkkS certified probes, our calibration certificate is available to ensure traceability.

EC Extrusion Coating Thermal Imaging System is supported by a 2-year warranty. Our team is available to answer questions regarding your application and our product. Click here to schedule a time to speak with an expert.

  • Application and Technical Support

    Our support lasts longer than any purchase. We’re here to help you implement a lasting solution, as well as troubleshoot, configure, and grow as your process does. With several hundred years of combined experience, our team of technical experts can help you determine the best instrument for your unique application and provide aid on other technical support questions. Get Application and Technical Support here.

  • Repair and Calibration Support

    With offices in the U.S., U.K., Germany, China, Japan, Singapore and India, as well as a network of trained representatives and technicians in over 100 countries, you can rely on local service and support for your repair and calibration needs. Additionally, with local service centers, your facility won’t face unnecessary downtime by shipping your tools overseas. Get Repair and Calibration Support here.

 

Literature

Spot Size Calculator: 

Download Spot Size Calculator Apps:

Download from the iOS AppStore Download from GooglePlay Download from the Windows Store
 

Get more information about this product
Welcome to Fluke's Chat GPT Assistant. As with other generative AI systems, this chatbot may occasionally generate incorrect information. For questions regarding the safe use of Fluke tools, please refer to your owners manual. You must comply with your employer’s safety standards and obtain necessary training before using Fluke tools or taking electrical measurements. To speak with a person, visit our Contact Us Page.
How can I help you today?